Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Signal Encoding Techniques.

Presentation on theme: "Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Signal Encoding Techniques."— Presentation transcript:

1 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Signal Encoding Techniques Chapter 6

2 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Reasons for Choosing Encoding Techniques Digital data, digital signal Equipment less complex and expensive than digital-to-analog modulation equipment Analog data, digital signal Permits use of modern digital transmission and switching equipment

3 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Reasons for Choosing Encoding Techniques Digital data, analog signal Some transmission media will only propagate analog signals E.g., optical fiber and unguided media Analog data, analog signal Analog data in electrical form can be transmitted easily and cheaply Done with voice transmission over voice- grade lines

4 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Signal Encoding Criteria What determines how successful a receiver will be in interpreting an incoming signal? Signal-to-noise ratio Data rate Bandwidth An increase in data rate increases bit error rate An increase in SNR decreases bit error rate An increase in bandwidth allows an increase in data rate

5 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Factors Used to Compare Encoding Schemes Signal spectrum With lack of high-frequency components, less bandwidth required With no dc component, ac coupling via transformer possible Transfer function of a channel is worse near band edges Clocking Ease of determining beginning and end of each bit position

6 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Factors Used to Compare Encoding Schemes Signal interference and noise immunity Performance in the presence of noise Cost and complexity The higher the signal rate to achieve a given data rate, the greater the cost

7 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Basic Encoding Techniques Digital data to analog signal Amplitude-shift keying (ASK) Amplitude difference of carrier frequency Frequency-shift keying (FSK) Frequency difference near carrier frequency Phase-shift keying (PSK) Phase of carrier signal shifted

8 Basic Encoding Techniques

9 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Amplitude-Shift Keying One binary digit represented by presence of carrier, at constant amplitude Other binary digit represented by absence of carrier where the carrier signal is Acos(2πf c t)

10 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Amplitude-Shift Keying Susceptible to sudden gain changes Inefficient modulation technique On voice-grade lines, used up to 1200 bps Used to transmit digital data over optical fiber

11 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Binary Frequency-Shift Keying (BFSK) Two binary digits represented by two different frequencies near the carrier frequency where f 1 and f 2 are offset from carrier frequency f c by equal but opposite amounts

12 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Binary Frequency-Shift Keying (BFSK) Less susceptible to error than ASK On voice-grade lines, used up to 1200bps Used for high-frequency (3 to 30 MHz) radio transmission Can be used at higher frequencies on LANs that use coaxial cable

13 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Multiple Frequency-Shift Keying (MFSK) More than two frequencies are used More bandwidth efficient but more susceptible to error f i = f c + (2i – 1 – M)f d f c = the carrier frequency f d = the difference frequency M = number of different signal elements = 2 L L = number of bits per signal element

14 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Multiple Frequency-Shift Keying (MFSK) To match data rate of input bit stream, each output signal element is held for: T s =LT seconds where T is the bit period (data rate = 1/T) So, one signal element encodes L bits

15 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Multiple Frequency-Shift Keying (MFSK) Total bandwidth required 2Mf d Minimum frequency separation required 2f d =1/T s Therefore, modulator requires a bandwidth of W d =2 L /LT=M/T s

16 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Multiple Frequency-Shift Keying (MFSK)

17 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Phase-Shift Keying (PSK) Two-level PSK (BPSK) Uses two phases to represent binary digits

18 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Phase-Shift Keying (PSK) Differential PSK (DPSK) Phase shift with reference to previous bit Binary 0 – signal burst of same phase as previous signal burst Binary 1 – signal burst of opposite phase to previous signal burst

19 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Phase-Shift Keying (PSK) Four-level PSK (QPSK) Each element represents more than one bit

20 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Phase-Shift Keying (PSK) Multilevel PSK Using multiple phase angles with each angle having more than one amplitude, multiple signals elements can be achieved D = modulation rate, baud R = data rate, bps M = number of different signal elements = 2 L L = number of bits per signal element

21 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Performance Bandwidth of modulated signal (B T ) ASK, PSKB T =(1+r)R FSKB T =2  F+(1+r)R R = bit rate 0 < r < 1; related to how signal is filtered  F = f 2 -f c =f c -f 1

22 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Performance Bandwidth of modulated signal (B T ) MPSK MFSK L = number of bits encoded per signal element M = number of different signal elements

23 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Quadrature Amplitude Modulation QAM is a combination of ASK and PSK Two different signals sent simultaneously on the same carrier frequency

24 Quadrature Amplitude Modulation

25 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Reasons for Analog Modulation Modulation of digital signals When only analog transmission facilities are available, digital to analog conversion required Modulation of analog signals A higher frequency may be needed for effective transmission Modulation permits frequency division multiplexing

26 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Basic Encoding Techniques Analog data to analog signal Amplitude modulation (AM) Angle modulation Frequency modulation (FM) Phase modulation (PM)

27 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Amplitude Modulation cos2  f c t = carrier x(t) = input signal n a = modulation index Ratio of amplitude of input signal to carrier a.k.a double sideband transmitted carrier (DSBTC)

28 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4

29 Spectrum of AM signal

30 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Amplitude Modulation Transmitted power P t = total transmitted power in s(t) P c = transmitted power in carrier

31 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Single Sideband (SSB) Variant of AM is single sideband (SSB) Sends only one sideband Eliminates other sideband and carrier Advantages Only half the bandwidth is required Less power is required Disadvantages Suppressed carrier can’t be used for synchronization purposes

32 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Angle Modulation Angle modulation Phase modulation Phase is proportional to modulating signal n p = phase modulation index

33 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Angle Modulation Frequency modulation Derivative of the phase is proportional to modulating signal n f = frequency modulation index

34 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Angle Modulation Compared to AM, FM and PM result in a signal whose bandwidth: is also centered at f c but has a magnitude that is much different Angle modulation includes cos(  (t)) which produces a wide range of frequencies Thus, FM and PM require greater bandwidth than AM

35 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Angle Modulation Carson’s rule where The formula for FM becomes

36 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Basic Encoding Techniques Analog data to digital signal Pulse code modulation (PCM) Delta modulation (DM)

37 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Analog Data to Digital Signal Once analog data have been converted to digital signals, the digital data: can be transmitted using NRZ-L can be encoded as a digital signal using a code other than NRZ-L can be converted to an analog signal, using previously discussed techniques

38 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Pulse Code Modulation Based on the sampling theorem Each analog sample is assigned a binary code Analog samples are referred to as pulse amplitude modulation (PAM) samples The digital signal consists of block of n bits, where each n-bit number is the amplitude of a PCM pulse

39 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Example

40 Pulse Code Modulation

41 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 PCM Block Diagram

42 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Pulse Code Modulation By quantizing the PAM pulse, original signal is only approximated Leads to quantizing noise Signal-to-noise ratio for quantizing noise Thus, each additional bit increases SNR by 6 dB, or a factor of 4

43 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Delta Modulation Analog input is approximated by staircase function Moves up or down by one quantization level (  ) at each sampling interval The bit stream approximates derivative of analog signal (rather than amplitude) 1 is generated if function goes up 0 otherwise

44 Delta Modulation

45 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Delta Modulation Two important parameters Size of step assigned to each binary digit (  ) Sampling rate Accuracy improved by increasing sampling rate However, this increases the data rate Advantage of DM over PCM is the simplicity of its implementation

46 Stallings, Wireless Communications & Networks, Second Edition, © 2005 Pearson Education, Inc. All rights reserved. 0-13-191835-4 Reasons for Growth of Digital Techniques Growth in popularity of digital techniques for sending analog data Repeaters are used instead of amplifiers No additive noise TDM is used instead of FDM No intermodulation noise Conversion to digital signaling allows use of more efficient digital switching techniques